MODEL M25, 30, 35

Ground Continuity Test Instrument

Safe, Fast, Efficient

• Performs ground continuity tests in full compliance with BSI, VDE and IEC
• Test time is adjustable from 1 second to 90 seconds
• Measures AC resistance from Chassis of Device Under Test (DUT) to power-cord ground lead – 0 to 0.15 ohm
• Audible and visual alarms identify faulty ground connections
• Hipot interface enables interconnecting to any ROD-L ROD-L Hipot Test Instrument to form an automatic test system
• AC power source supplies 25, 30m 35 Amps (user specified) at Å 2.5 volts

ROD-L Hipot Test Systems Interfacing

• The Ground Continuity Test Instrument can be interconnected with any ROD-L Hipot Test Instrument to operate as a fully automatic system
• One connection for DUT, and one start button to press

SUPERIOR SAFETY FEATURES

• Front panel receptacle is rated to 8000 VAC
• Front panel receptacle prevents director operator exposure to high voltage during test

For specifications, call ROD-L or download the PDF file and refer to page 2.

pdf

Production/Quality Assurance Testing

• After test parameters are preset, a single button actuates the Fully Automatic test cycle
• Measures ground continuity from chassis ground to the power cord ground pin of the DUT
• Detects and indicates the following:
  • Test in Progress
  • Test Failed
  • Resistance measurement, 0-0.15 ohm
  • Current measurement in amperes
• Ground resistance trip point easily preset via rear panel potentiometer
• If the ground resistance exceeds the preset value, a fail is indicated both audibly and visually