|
|
 ROD-L M150AC |
|
|
|
|
|
All ROD-L hipot testers have adjustable electronically controlled test voltage ramp control and timing circuits. In addition, ROD-L AC and DC hipot testers interconnect to simplify multiple testing requirements. Each are compatible with all ROD-L Ground Continuity and Leakage Current test instruments. |
|
|
|
|
|
| MODEL M150AC |
 |
Hipot Test System
IEEE-488 BUS-Compatible Hipot Test System |
|
Safe, Fast Efficient
Fully programmable test parameters |
|
|
 |
Digital display |
|
|
|
Resolution of programmable test parameters is 0.5% |
|
|
|
Performs an AC dielectric strength (Hipot) test concurrent with a ground continuity test |
|
|
|
Applies a test potential of up to 5000 VAC at 50 milliamps (user programmable) |
|
|
|
IEEE-488 BUS-compatible - enables data logging during each test, and remote programming of: |
|
|
|
|
Test voltage |
|
|
|
Test time |
|
|
|
Voltage ramp rate |
|
|
|
Real current trip point |
|
|
|
Total current trip point |
|
|
|
Under current trip point |
|
|
|
|
Detects and indicates the following events: |
|
|
|
|
Test ready (security chassis ground sensed) |
|
|
|
Test in progress |
|
|
|
Test passed |
|
|
|
Test failed |
|
» Arcing |
|
» Excessive real (resistive) current |
|
» Excessive total leakage current |
|
» Under current |
|
» Lack of adequate chassis ground |
|
|
|
|
Performs tests in full compliance with UL, VDE, BSE, IEC, CSA, and other test standards |
|
|
|
| Superior Safety Features |
|
|
|
Visual and audible alert indicating Hipot test in progress |
|
|
|
Low current security chassis ground circuit (ensures device under test has ground connection of 0.5ohm between chassis and power cord ground pin) |
|
|
|
Fast HV shutdown within 2 milliseconds of HV test automatically on test failure or on command |
|
|
|
|
|
|
|
|
